How to Install a GPS Tracker on Your Bike in India (Step-by-Step Guide )
Protect Your Bike from Theft with LostMod GPS Tracker
Bike theft is a growing problem across India, especially in states like Punjab, Delhi, Haryana, Uttar Pradesh, and Maharashtra. Every year, more than 10 lakh two-wheelers are reported stolen in India. Whether you own a Hero Splendor, Honda Activa, Bajaj Pulsar, TVS Apache, Royal Enfield, KTM, Yamaha, or Suzuki, installing a GPS tracker is one of the smartest investments you can make.
The best part? Installing a LostMod GPS Tracker is simple and can be completed in just 30–45 minutes, even if you have basic knowledge of vehicle wiring.
This installation guide covers everything you need to know, including:
- Tools required
- Wiring instructions
- SIM activation
- App setup
- Hidden installation tips
- Engine cut-off relay installation
- Testing the GPS tracker
What Comes Inside the Box?
Your LostMod GPS Tracker package includes:
✅ LostMod GPS Tracker (with pre-installed but inactive Airtel SIM)
✅ 3-wire wiring harness (Red, Black & Yellow)
✅ Engine Cut-Off Relay (for two-wheelers only)
✅ Zip ties & mounting clips
✅ Printed installation guide
Tools You'll Need
- Screwdriver set
- Wire stripper or cutter
- Electrical insulation tape
- Cable ties
- Multimeter (recommended but optional)
Step 1 – Switch Off the Bike & Locate the Battery
Turn the ignition OFF and remove the key.
On most motorcycles (Hero Splendor, Pulsar, Apache, Royal Enfield, etc.), the battery is located under the seat.
For scooters such as the Honda Activa, the battery is generally located beneath the floorboard or under the seat, depending on the model.
Step 2 – Connect the Main Power Wires
The GPS tracker has three main wires:
| Wire | Connect To | Purpose |
|---|---|---|
| 🔴 Red | Battery Positive (+12V) | Permanent Power |
| ⚫ Black | Battery Negative (Ground) | Ground Connection |
| 🟡 Yellow | Ignition (ACC) Wire | Detects Ignition ON/OFF |
Important
- Red wire must always receive constant 12V power.
- Black wire connects directly to battery negative.
- Yellow wire connects to the ignition (ACC) wire so the tracker can detect when the vehicle starts or stops.
Step 3 – Locate the Ignition (ACC) Wire
Use a multimeter or test light to identify the ignition wire.
The correct ACC wire:
- Shows 12V only when the ignition key is ON
- Shows 0V when the ignition is OFF
On many Indian motorcycles, the ACC wire is often Orange, Red, or Brown, but wire colours vary by manufacturer.
If you're unsure, consult your motorcycle's wiring diagram or seek assistance from a qualified auto electrician.
What if I can't find the ignition wire?
You can still use the GPS tracker by connecting only:
- Red → Battery Positive
- Black → Battery Negative
The tracker will continue providing live location tracking. However, ignition ON/OFF status and related alerts will not function without the yellow ACC wire.
Step 4 – Install the Engine Cut-Off Relay (Optional)
The Engine Cut-Off Relay allows you to remotely stop the engine through the LostMod Track App if your bike is stolen.
Installation
- Locate the ignition supply wire.
- Cut the wire carefully.
- Connect both cut ends to the relay as shown in the relay wiring diagram.
- Connect the relay control wires to the GPS tracker according to the supplied wiring guide.
After installation, you can remotely disable the engine using the LostMod app.
Important Safety Notice
⚠ Install the Engine Cut-Off Relay only on two-wheelers.
It is NOT recommended for cars or other four-wheelers, as remotely interrupting engine power while driving could create unsafe situations. Four-wheelers should use GPS tracking without the engine cut-off feature unless installation is performed according to vehicle-specific safety requirements.
Step 5 – Activate the SIM & Hide the GPS Tracker
Your LostMod GPS Tracker already contains a pre-installed Airtel SIM card.
The SIM is not activated at the factory.
After receiving your GPS tracker:
Contact LostMod Support on WhatsApp
📞 +91 77173 77274
to activate your SIM card.
Best Places to Hide the GPS Tracker
Recommended locations include:
- Behind the instrument cluster
- Under the seat compartment
- Inside the headlamp housing
- Behind the front fairing
- Inside the side panels
Installation Tips
- Keep the GPS antenna facing upward whenever possible.
- Avoid wrapping the tracker in metal foil or placing it inside metal enclosures, as this can reduce GPS signal strength.
- Secure the tracker firmly using zip ties to prevent movement caused by road vibrations.
Step 6 – Install the LostMod Track App
Download LostMod Track from:
- Google Play Store
- Apple App Store
After installation:
- Sign in using the account details provided by LostMod Support.
- Open Your Devices.
- Rename your vehicle (for example, My Pulsar or Activa 125).
- Save the settings.
Step 7 – Test the Installation
- Start your bike.
- Wait 2–3 minutes for the GPS to obtain satellite signals.
- Open the LostMod Track App.
- Your bike should appear on the live map.
- Ride approximately 100–200 metres to confirm that the location updates correctly.
If the bike is parked inside a basement or enclosed garage, move it outdoors for the initial GPS lock.
Frequently Asked Questions (FAQs)
Can I install the GPS tracker myself?
Yes. Most users complete the installation in 30–45 minutes using the included wiring kit and installation guide. If you're not comfortable working with vehicle wiring, you can also have it installed by a local auto electrician.
Will the GPS tracker drain my bike's battery?
No.
The LostMod GPS Tracker consumes less than 20mA in standby mode, which is significantly lower than the power used by many factory-installed clocks or alarm systems. Under normal conditions, it has minimal impact on battery life.
Does GPS tracking work in rural India?
Yes.
The LostMod GPS Tracker uses the Airtel 2G/4G network, providing wide coverage across India, including many rural areas. Actual performance depends on local cellular network availability.
What if I can't find the ignition wire?
You can still use the GPS tracker by connecting only:
- Red → Battery Positive
- Black → Battery Negative
The tracker will continue providing live location tracking. However, ignition ON/OFF status and related alerts will not function without the yellow ACC wire.
Why Choose LostMod GPS Tracker?
✔ Real-Time Live Tracking
✔ Trip History Playback
✔ Geo-Fence Alerts
✔ Overspeed Notifications
✔ Remote Engine Cut-Off (Two-Wheelers)
✔ One-Year Airtel SIM Included
✔ Android & iPhone App Support
✔ Pan India Coverage
✔ Starting from ₹1300*
Final Thoughts
Installing a GPS tracker is one of the easiest and most effective ways to protect your motorcycle or scooter from theft.
Whether you ride a Hero Splendor, Honda Activa, Bajaj Pulsar, TVS Apache, Royal Enfield, or any other two-wheeler, spending just 30–45 minutes on installation can help safeguard a vehicle worth ₹70,000 to ₹3,00,000.
With LostMod GPS Tracker, you get real-time tracking, instant theft alerts, trip history, geo-fencing, and remote engine cut-off (for two-wheelers), all in one compact device.
Protect your ride today with LostMod GPS Tracker — because prevention is always better than recovery.
0 comments